This is 2 gangs Smart Dimmer Switch Module with RF function, enable you to wireless control on/off and brightness of light by Mobile Phone,RF Remote Controller,Alexa and Google Home, as well as 2 gangs manual switch.
This is 2 gangs smart wifi dimmer switch module with RF function, which will transform your traditional 2 gangs dimmer into Smart, wireless controlled by your Mobile Phone,RF Remote controller,Alexa and Google Home, as well as keep the function of existing switch.
2.Easy to install behind the existing switch, keep function of manual switches.
3.No hub required, WIFI router is enough
4.App control is synchronized with the manual switch
5.Voice control compatible with Google home and Amazon Alex
6.Mininum brightness is settable
7.Schedule,group, scene, automation functions organizable with other smart home devices,easily achieve home automation.
EMC Standard (EMC)
EN 300 328 V2.1.1 (2016-11),
EN 301489-1 V2.1.1 (2017-02),
EN 301489-17 V3.1.1 (2017-02),
EN 62311: 2008, EN 55015:20 13 +A1:2015, EN 61547:2009
Radio Equipment (RED)
ETSI EN 300 328 V2.1.1 (2016-11)
Safety Standard (LVD)
AMD2:2015, IEC 60669-1:1998/
EN 60669-2-1:2004+A1: 2009+ A2:2010,
RoHS Standard (RoHS)
2011/65/EU, (EU) 2015/863
Product type 2 Gang WiFi+RF Dimmer Module
Voltage 220-240V AC 50Hz
Max. load 2x100W
WIFI Frequen cy 2.4GHz – 2.4835GHz
Operation temp. -10ºC – +40ºC
Case temp. Tc: +80ºC (Max.)
Operation range 200 m
Dims (WxDxH) 46*46*18mm(without clip)
IP rating IP20
Warranty 2 years
Dimming type Trailing Edge
Q1: What should I do if I can’t configure the dimmer
a. Please check whether device is powered on.
b. Make sure your mobile and dimmer module are the
same 2.4 Ghz WIFI network.
c. Whether it’s in good internet conditions.
d. Make sure the password entered in App is correct.
e. Make sure the wiring is correct.
Q2: What device can be connected to WiFi dimmer
Triac led light,incandescent light and halogen light.
Q3: What happens if the WIFI goes off?
You can still control the light with your traditional switch
and once WIFI is active again the device will connect
automatically to your WIFI network.
Q4: What should I do if I change the WIFI network or
change the password?
You have to re-connect our Wi-Fi dimmer module to
the new Wi-Fi network accordingly as per the App
Q5: How do I reset the device?
Press off led light(the one connected to the WiFi dimmer module) then press and hold for 10 seconds or more until lamp connected to the module flash quickly into configure mode.