This is one gang Smart Bluetooth Dimmer Switch Module, enable you to wireless control on/off and brightness of light via Bluetooth by Mobile Phone,RF Remote Controller,Alexa and Google Home, as well as manual switch.
This is one gang smart bluetooth dimmer switch module, which will transform your traditional dimmer into Smart, wireless controlled by your Mobile Phone,RF Remote controller,Alexa and Google Home, as well as keep the function of existing switch.
1.Protocol: Bluetooth 4.0 Mesh
2.Easy to install behind the existing switch, keep function of manual switches.
3.No hub required
4.App control is synchronized with the manual switch
5.Voice control compatible with Google home and Amazon Alex
6.Mininum brightness is settable
7.Schedule,group, scene, automation functions organizable with other smart home devices,easily achieve home automation.
EMC Standard (EMC)
EN 300 328 V2.1.1 (2016-11),
EN 301489-1 V2.1.1 (2017-02),
EN 301489-17 V3.1.1 (2017-02),
EN 62311: 2008, EN 55015:20 13 +A1:2015, EN 61547:2009
Radio Equipment (RED)
ETSI EN 300 328 V2.1.1 (2016-11)
Safety Standard (LVD)
AMD2:2015, IEC 60669-1:1998/
EN 60669-2-1:2004+A1: 2009+ A2:2010,
RoHS Standard (RoHS)
2011/65/EU, (EU) 2015/863
Product type: Bluetooth dimmer module
Voltage: 220-240V AC
Max. load: 150W (LED)
Bluetooth 4.0 Mesh
Operation temp. -10ºC – +40ºC
Case temp. Tc: +80ºC (Max.)
Operation range <10 m
Dims (WxDxH) 51x47x22 mm
IP rating IP20
Warranty 2 years
Dimming type: Trailing Edge
Please check in the following steps if you cannot find your bluetooth device:
1.Make sure your device is connected to the power
source or the battery is charged.
2.Please enable the bluetooth of your mobile phone.
For Android phones, it is required to location
permission due to system conguration.
3.Keep the distance between the device and your
mobile phone within 5m to ensure the connection
4.Make sure your device is ready to be added as
* For devices without button, you can power on the
device repeatedly in 3 seconds intervals.
* For devices with button or reset hole, you can try
to press on/off the button for at least 5 times.
When the device is ready to be added, there will
generally be a continuous beep from the module.
If you still cannot add the device after, please give
feedback to our staff in Personal Center>Feedback.