+86 0755 27358708       |   info@aihomestyle.com   |   qualityled1

2 Gang Bluetooth Dimmer Module



This is 2 Gangs Smart Bluetooth Dimmer Switch Module, enable you to wireless control on/off and brightness of light via Bluetooth by Mobile Phone,RF Remote Controller,Alexa and Google Home, as well as manual switch.

  • Description
  • Specs
  • Faq


This is 2 gangs bluetooth dimmer switch module, which will transform your traditional dimmer into Smart, wireless controlled by your Mobile Phone APP,RF Remote controller,Alexa and Google Home, as well as keep the function of traditional switch.


1.Protocol: Bluetooth 4.0 Mesh

2.Easy to install behind the existing switch, keep function of manual switches.

3.No hub required

4.App control is synchronized with the manual switch

5.Voice control compatible with Google home and Amazon Alex

6.Mininum brightness is settable

7.Schedule,group, scene, automation functions organizable with other smart home devices,easily achieve home automation.

Quality Standard

EMC Standard (EMC)
EN 300 328 V2.1.1 (2016-11),
EN 301489-1 V2.1.1 (2017-02),
EN 301489-17 V3.1.1 (2017-02),
EN 62311: 2008, EN 55015:20 13 +A1:2015, EN 61547:2009

Radio Equipment (RED)
ETSI EN 300 328 V2.1.1 (2016-11)

Safety Standard (LVD)
IEC 60669-2-1:2002/AMD1:2008/
AMD2:2015, IEC 60669-1:1998/
EN 60669-2-1:2004+A1: 2009+ A2:2010,
EN 60669-1:2018

RoHS Standard (RoHS)
2011/65/EU, (EU) 2015/863


Product type: 2 gangs Bluetooth dimmer module
Voltage: 220-240V AC
Max. load: 2*100W (LED)
Bluetooth 4.0 Mesh
Operation temp. -10ºC – +40ºC
Case temp. Tc: +80ºC (Max.)
Operation range  <10 m
Dims (WxDxH) 46x46x18 mm
IP rating IP20
Warranty 2 years
Dimming type: Trailing Edge

Please check in the following steps if you cannot find your bluetooth device:

1.Make sure your device is connected to the power
source or the battery is charged.
2.Please enable the bluetooth of your mobile phone.
For Android phones, it is required to location
permission due to system conguration.
3.Keep the distance between the device and your
mobile phone within 5m to ensure the connection
of devices.
4.Make sure your device is ready to be added as
* For devices without button, you can power on the
device repeatedly in 3 seconds intervals.

* For devices with button or reset hole, you can try
to press on/off the button for at least 5 times.
When the device is ready to be added, there will
generally be a continuous beep from the module.
If you still cannot add the device after, please give
feedback to our staff in Personal Center>Feedback.


Enquiry Form ( we will get back to you as soon as possible )